Pricing
What Window Replacement Costs on a Wentzville House
Window replacement cost on a Wentzville house comes down to three things: the windows you choose, the condition of each opening, and how many openings there are. Below is what each one adds, and how to line up two quotes so you're comparing the same job.
We don't post a per-window price. Two houses on the same street can need very different work at the frames, and a number given before measuring tends to change once someone looks. What we can show you is where the price comes from.
The Window Itself
- Style. Double-hungs and sliders are the everyday price. Casements, awnings, picture-window combinations and specialty shapes cost more because there's more hardware or custom fabrication in them.
- Size. Bigger glass costs more, and very large units can need heavier frames.
- Glass. Low-E and argon are standard on most lines today. Triple-pane, extra coatings and laminated glass add to it.
- Color and grids. White is the base. Tan, dark exterior finishes, interior wood-look laminates and grids between the glass each add a step.
- The line. Within one maker there are usually several grades, and the frame, the hardware and the warranty differ between them.
The Opening and the Trim
An insert into a sound frame is the least labor. Taking an opening back to the studs costs more: the old frame comes out, the opening is flashed again, and the interior trim and sometimes a strip of siding are replaced around it.
Hidden damage adds to the job too. A sill that has been taking water for years needs new wood before any window goes in, and that only shows once the old window is out. On the outside, every window's trim gets a metal wrap, matched to the house or in an accent color; wide or decorative trim takes more of it, and once it's wrapped the painting is done for good.
How Many, and Which Floor
Every job carries the same fixed pieces: the measure visit, the factory order, getting the crew and the old-window haul to your driveway. Spread over twenty windows they're a small slice of each one; on two windows they're a bigger share. Second-story openings above a roof, a deck or a steep slope take more time and equipment than ones reachable from the ground.
Putting Window Replacement Cost Quotes Side by Side
Before deciding on the lower number, make sure both quotes answer the same questions:
- Is it the same window line and grade, with the same glass?
- Which openings are inserts and which get a full tear-out?
- Is exterior trim covered, and with what material?
- Who handles rot found once a window is out, and how is it priced?
- Are removal and disposal of the old windows included?
- What's covered by the product warranty, and what's covered on the labor, and for how long?
- If the job needs a permit, whose name is it pulled in?
Cost Questions
Why do two quotes for the same house differ so much?
Usually because they aren't quoting the same job. One may be a different window line or glass package, one may plan to insert every window while the other tears some frames out, and one may leave out exterior trim. Put them side by side using the checklist above and most of the gap explains itself.
Is it cheaper to replace every window at once?
Per window, usually yes. The trip, the setup and the factory order are shared across more openings, and the windows all match. If the budget won't stretch, start with the worst rooms or the sunniest side and do the rest later in the same line, so the second round matches the first.
How do basement windows compare on price?
A basement window swapped into its existing opening is usually one of the smaller line items on a quote: the windows are small, they're reached from inside, and there's little trim around them. The basement windows page covers that job.
Get a price for your house
We'll measure every opening and price each one, so you can see what the windows cost and what the work around them costs.